Plastic Rocking Chair – To build a backrest for a plastic rocking chair with recycled materials, make sure you have on hand: flexible plastic, needle and thread, awl, cardboard, Foam, string, hot glue, cloth, cutter, stapler
Take plastic rocking chair: you will notice that has two holes; these holes will be useful later to lock the structure. Take the cardboard or the plastic flexible and surrounded the chair vertically in the upper part, in such a way as to recreate the base of the back to work on. Blocked spills thoroughly and if you deem it appropriate, given also a past of hot glue. Remember to re-create the holes, perhaps with the aid of a punch or cutter. Now with cardboard or flexible plastic wrapped to the horizontal towards your base around the perimeter leaving out the corners. Locked as explained above.
Finally strengthened corners, in such a way that the back that backrest for a plastic rocking chair you have created will not fall. Now past the string on the holes and tie a knot. Take a piece of string end, so that you can pass it within several times. Even a strong cotton thread can do the usual function. Take a first round complete with a node, but not cut.